POLI-FLEX® 4790 LUMINOUS - POLIFLEX 4790
Glowing in the dark flex film laminated with a heat sealing adhesive
POLI-FLEX® LUMINOUS is suitable for transfer to textiles like cotton, mixtures of polyester/cotton and polyester/acrylic. POLI-FLEX® LUMINOUS can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles. The Luminescent (Glow in the Dark) period and intensity depends on several factors, light source, intensity of light source and the duration of illumination. POLI-FLEX® LUMINOUS can glow for more than 20 hours if the film is completely charged, The afterglow is reduced during illumination, we cannot specify any measured values. The film can be charged within 60 seconds if subjected to direct sunshine. This is enough to generate the Glow in the Dark effect for more than 20 hours. POLI-FLEX® LUMINOUS convinces due to the high quality and high percentage of phosphorescent pigments used and provides a long sustained afterglow.
POLI-FLEX® LUMINOUS can be cut with all current plotters. We recommend using a standard 45° knife. After weeding the cut flex film is transferred by heat press. The PET liner should be removed warm. Nylon and textiles with hydrophobic impregnation are not suitable for heat transfer. In this case we recommend using POLI-FLEX® NYLON. Guarantee for a secure and long-lasting bond of POLI-FLEX® LUMINOUS is only given when following the specified temperature and pressure conditions. We recommend evaluation on test material
Transfer Conditions Temperature: 160 °C Pressure: 3,5 bar [medium pressure] Time: 15 sec. Wash Resistance Wash resistance: 60 °C Wash textile inside out. Tumble dryable.